Logo
Logo RX170 RX220
from € 169.00
monthly
excl. VAT
from € 219.00
monthly
excl. VAT
once-off setup: € 79.00 once-off setup: € 79.00
Locations:
Locations:
speed
storage
speed
storage
configure configure
matrix_cpu Details Details
CPU
  • Ampere ® Altra ® Q80-30
  • Ampere ® Altra ® Q80-30
CPU-Details
  • 80 Cores
    Single-Threading
    Arm64-Architektur
  • 80 Cores
    Single-Threading
    Arm64-Architektur
RAM
  • 128 GB ECC RAM
  • 256 GB ECC RAM
NVMe SSD
  • 2 x 960 GB (Gen4)
  • 2 x 3,84 TB (Gen4)
Connection
  • 1 GBit/s-Port
Guaranteed bandwidth
  • 1 GBit/s
Operating system installation
  • preinstalled
Linux operating system (64-Bit)
  • Debian 11.7 base, Ubuntu 22.04.1 LTS, Ubuntu 20.04.3 (HWE) LTS minimal
Administration
(available for LAMP)
  • Webmin
Plesk Obsidian
optional
  • from € 6.20/month
Linux
Apache
MySQL
PHP
Idle Power usage
Power consumption values of the basic configuration excl. storage medium. The values originate from the server qualification and may deviate in practice.
  • 50 Watt
  • 62 Watt
Max Power usage
Power consumption values of the basic configuration excl. storage medium. The values originate from the server qualification and may deviate in practice.
  • 160 Watt
  • 172 Watt
Disc Power usage
The consumption values of the storage media may vary in practice. The figures refer to a single drive in each case.
  • NVMe SSD: 5 Watt (Idle) / 13 Watt (Max)
    SATA SSD: 1.5 Watt (Idle) / 3.5 Watt (Max)
    SATA HDD: 6 Watt (Idle) / 11 Watt (Max)
Sustainability
  • 100% green electricity
Traffic
Traffic usage is unlimited and free of charge. Please note that our unlimited traffic policy does not apply to servers that have the 10G uplink addon.
  • Unlimited
Free internal traffic
Primary IPv4
optional IPv4 address
  • 1
  • 1
IPv6-Subnetz (/64)
24h server monitoring with email notification
100 GB backup space
These servers include a free Storage Box BX10 that you can use for backup space. However, to get the BX10, you first need to order it. You can order the BX10 in the Robot administration interface after we have deployed the server. To order it, find the correct server on Robot, and then go to "Backup" in the server's menu. The Storage Box is run on a shared backup cluster. Your data is stored on a RAID 6 (with multiple redundancy) and is protected with checksums. The server can be accessed via FTP. Should you have any special requirements about the installed software, please contact us. The backup server service is only accessible from within the server farm. This offer does not include backup software. Customers are responsible for regularly carrying out backups themselves. Hetzner Online GmbH only provides storage space which is strictly limited by quotas.
Full root access
24h reset service via web interface
You can trigger an automatic hardware reset via your Hetzner web interface or send a "Ctrl-Alt-Del" to your server. You also have the option of requesting a free manual hardware reset around the clock.
Rescue-System
VNC installation
Virtual Network Computing, VNC, enables the operating system installation directly via the admin interface Robot.
Image-Installer
The Image Installer allows you to install operating system images conveniently via the Rescue System.
Traffic statistics
Keep track of the graphical and tabular evaluation of your traffic usage. You can view daily, monthly and yearly reports via the admin interface. The Traffic Reporting function informs you by email if the limits you have set have been exceeded.
Reverse DNS Administration
Reverse DNS Administration determines the host name associated with a given IP address.
Domain Registration Robot
Wake On Lan
With "Wake On Lan" (WOL) you can start up a Dedicated Root Server which has been shut down by using the administration interface Robot. Especially environmentally-conscious customers turn off their servers when not in use to reduce energy consumption.
Basic support
Basic support includes the free replacement of defective hardware and the renewed loading of the basic system (in so far as a disk image system can be loaded).
Documentation
Free phone support
Free email support
Data center 24/7 on-site service
Total bandwidth
  • 30.9 TBit
Network availability
  • min. 99.9 %
DDoS protection
Firewall
Hetzner Online's stateless firewall allows customers to define filter rules for incoming traffic via their accounts in the customer administration interface Robot. For example, customers can set rules regarding IPv4 source addresses or the TCP/UDP source port. Defining firewall rules like these prevents unpermitted access to customers' servers. (Primary IPv4 required)
vSwitch
With the vSwitch feature, you can connect your dedicated root servers in multiple locations to each other using VLAN via the administration interface Robot.
Redundant network
Juniper routing technology
High-speed access to all Internet uplinks
24/7 monitoring
Remote Hands
Remote Hands includes the processing of extensive support enquiries.
  • € 21.00 (1/4 h)
Additional Single IP
Primary IPv4 required
  • € 1.70/month - € 4.90 setup
Additional IP Subnets
Allocation in accordance with RIPE guidelines; Primary IPv4 required
  • /29 (6 usable IPs) - € 13.60/month - € 34.90 setup
    /28 (14 usable IPs) - € 27.20/month - € 59.90 setup
    /27 (30 usable IPs) - € 54.40/month - € 109.00 setup
    /26 (62 usable IPs) - € 108.80/month - € 199.00 setup
    /25 (126 usable IPs) - € 217.60/month - € 369.00 setup
    /24 (254 usable IPs) - € 435.20/month - € 659.00 setup
Failover IP
Primary IPv4 required
  • € 5.10/month - € 4.90 setup
Additional Failover Subnets
Primary IPv4 required
  • /29 (6 usable IPs) - € 22.00/month - € 34.90 setup
    /28 (14 usable IPs) - € 35.60/month - € 59.90 setup
    /27 (30 usable IPs) - € 62.80/month - € 109.00 setup
    /26 (62 usable IPs) - € 117.20/month - € 199.00 setup
    /25 (126 usable IPs) - € 226.00/month - € 369.00 setup
    /24 (254 usable IPs) - € 443.60/month - € 659.00 setup
Storage Box
  • 1 TB - € 3.20/month
    5 TB - € 10.90/month
    10 TB - € 20.80/month
    20 TB - € 40.60/month
Minimum contract period
  • none
Cancellation period
  • 30 days to the end of the month
Possible payment methods
  • bank transfer, credit card, Paypal and SEPA direct debit for accounts from SEPA countries
Data Processing Agreement
Data Processing Agreement (DPA) in accordance with Article 28 of the GDPR (General Data Protection Regulation, a European Union regulation)
  • optional
CPU
  • Ampere ® Altra ® Q80-30
  • Ampere ® Altra ® Q80-30
CPU-Details
  • 80 Cores
    Single-Threading
    Arm64-Architektur
  • 80 Cores
    Single-Threading
    Arm64-Architektur
RAM
  • 128 GB ECC RAM
  • 256 GB ECC RAM
NVMe SSD
  • 2 x 960 GB (Gen4)
  • 2 x 3,84 TB (Gen4)
Connection
  • 1 GBit/s-Port
Guaranteed bandwidth
  • 1 GBit/s
Operating system installation
  • preinstalled
Linux operating system (64-Bit)
  • Debian 11.7 base, Ubuntu 22.04.1 LTS, Ubuntu 20.04.3 (HWE) LTS minimal
Administration
(available for LAMP)
  • Webmin
Plesk Obsidian
optional
  • from € 6.20/month
Linux
Apache
MySQL
PHP
Idle Power usage
Power consumption values of the basic configuration excl. storage medium. The values originate from the server qualification and may deviate in practice.
  • 50 Watt
  • 62 Watt
Max Power usage
Power consumption values of the basic configuration excl. storage medium. The values originate from the server qualification and may deviate in practice.
  • 160 Watt
  • 172 Watt
Disc Power usage
The consumption values of the storage media may vary in practice. The figures refer to a single drive in each case.
  • NVMe SSD: 5 Watt (Idle) / 13 Watt (Max)
    SATA SSD: 1.5 Watt (Idle) / 3.5 Watt (Max)
    SATA HDD: 6 Watt (Idle) / 11 Watt (Max)
Sustainability
  • 100% green electricity
Traffic
Traffic usage is unlimited and free of charge. Please note that our unlimited traffic policy does not apply to servers that have the 10G uplink addon.
  • Unlimited
Free internal traffic
Primary IPv4
optional IPv4 address
  • 1
  • 1
IPv6-Subnetz (/64)
24h server monitoring with email notification
100 GB backup space
These servers include a free Storage Box BX10 that you can use for backup space. However, to get the BX10, you first need to order it. You can order the BX10 in the Robot administration interface after we have deployed the server. To order it, find the correct server on Robot, and then go to "Backup" in the server's menu. The Storage Box is run on a shared backup cluster. Your data is stored on a RAID 6 (with multiple redundancy) and is protected with checksums. The server can be accessed via FTP. Should you have any special requirements about the installed software, please contact us. The backup server service is only accessible from within the server farm. This offer does not include backup software. Customers are responsible for regularly carrying out backups themselves. Hetzner Online GmbH only provides storage space which is strictly limited by quotas.
Full root access
24h reset service via web interface
You can trigger an automatic hardware reset via your Hetzner web interface or send a "Ctrl-Alt-Del" to your server. You also have the option of requesting a free manual hardware reset around the clock.
Rescue-System
VNC installation
Virtual Network Computing, VNC, enables the operating system installation directly via the admin interface Robot.
Image-Installer
The Image Installer allows you to install operating system images conveniently via the Rescue System.
Traffic statistics
Keep track of the graphical and tabular evaluation of your traffic usage. You can view daily, monthly and yearly reports via the admin interface. The Traffic Reporting function informs you by email if the limits you have set have been exceeded.
Reverse DNS Administration
Reverse DNS Administration determines the host name associated with a given IP address.
Domain Registration Robot
Wake On Lan
With "Wake On Lan" (WOL) you can start up a Dedicated Root Server which has been shut down by using the administration interface Robot. Especially environmentally-conscious customers turn off their servers when not in use to reduce energy consumption.
Basic support
Basic support includes the free replacement of defective hardware and the renewed loading of the basic system (in so far as a disk image system can be loaded).
Documentation
Free phone support
Free email support
Data center 24/7 on-site service
Total bandwidth
  • 30.9 TBit
Network availability
  • min. 99.9 %
DDoS protection
Firewall
Hetzner Online's stateless firewall allows customers to define filter rules for incoming traffic via their accounts in the customer administration interface Robot. For example, customers can set rules regarding IPv4 source addresses or the TCP/UDP source port. Defining firewall rules like these prevents unpermitted access to customers' servers. (Primary IPv4 required)
vSwitch
With the vSwitch feature, you can connect your dedicated root servers in multiple locations to each other using VLAN via the administration interface Robot.
Redundant network
Juniper routing technology
High-speed access to all Internet uplinks
24/7 monitoring
Remote Hands
Remote Hands includes the processing of extensive support enquiries.
  • € 21.00 (1/4 h)
Additional Single IP
Primary IPv4 required
  • € 1.70/month - € 4.90 setup
Additional IP Subnets
Allocation in accordance with RIPE guidelines; Primary IPv4 required
  • /29 (6 usable IPs) - € 13.60/month - € 34.90 setup
    /28 (14 usable IPs) - € 27.20/month - € 59.90 setup
    /27 (30 usable IPs) - € 54.40/month - € 109.00 setup
    /26 (62 usable IPs) - € 108.80/month - € 199.00 setup
    /25 (126 usable IPs) - € 217.60/month - € 369.00 setup
    /24 (254 usable IPs) - € 435.20/month - € 659.00 setup
Failover IP
Primary IPv4 required
  • € 5.10/month - € 4.90 setup
Additional Failover Subnets
Primary IPv4 required
  • /29 (6 usable IPs) - € 22.00/month - € 34.90 setup
    /28 (14 usable IPs) - € 35.60/month - € 59.90 setup
    /27 (30 usable IPs) - € 62.80/month - € 109.00 setup
    /26 (62 usable IPs) - € 117.20/month - € 199.00 setup
    /25 (126 usable IPs) - € 226.00/month - € 369.00 setup
    /24 (254 usable IPs) - € 443.60/month - € 659.00 setup
Storage Box
  • 1 TB - € 3.20/month
    5 TB - € 10.90/month
    10 TB - € 20.80/month
    20 TB - € 40.60/month
Minimum contract period
  • none
Cancellation period
  • 30 days to the end of the month
Possible payment methods
  • bank transfer, credit card, Paypal and SEPA direct debit for accounts from SEPA countries
Data Processing Agreement
Data Processing Agreement (DPA) in accordance with Article 28 of the GDPR (General Data Protection Regulation, a European Union regulation)
  • optional